10. CONTROL BOXES AND TEMPLATES CHANGE IN THE CONTROL LEVER POSITION 2. Remove the four screws and remove the dwell plate retainer. RIGHT-HAND REMOTE CONTROL BOX CAM PLATE I CIRCLIP THROTTLE ARM ASSY. LEFT-HAND REMOTE CONTROL BOX 3. Remove the circlip, then remove the plate. PLAIN BRAKE SHOE The remote control box permits you to change the control lever position from the right-hand side to the left-hand side or vice versa. SCREW DWELL PLATE \ RETAINER BACK PLATE \ THROTTLE ARM ASSEMBLY 4. Remove the E-ring and plain washer from the throttle shaft, loosen the adjusting screw, and remove the throttle arm assembly and bushing. 5. Remove the brake disk and brake shoe assembly.
THROTTLE SHAFT \ SCREW SCREWS 1. Loosen the five screws and remove the back plate. HEX 6. Loosen the two hex head bolts and remove the throttle shaft. Date of Issue: June 2003 0 2001-2003 American Honda Motor Co., Inc. 10132