honda — BF8D/BF9.9D

2. BF8DIBF9.9D REMOTE CABLE INSTALLATION First, install the remote control box and cables. Remote Control Cables LOCK PLATE (2) GRO~MET . 1. 1. Remove the grommet and the control cable plate. Place the grommet over the cables, even with the locking grooves. The shift cable must be on the bottom 2. Remove the four (4) screws on each lower case cover and loosen the top-rear screw. 2. Pull the covers out from the engine about 20 mm (0.78 in) and allow them to droop. 3. Slide the plate into the grooves, press the grommet against the plate, and slide the assembly into position in the lower case. 2-1 1 Date of Issue: June 2003 0 2001-2003 American Honda Motor Co., Inc.