honda — BF40A/BF50A

5. BF40NBFSOA Combination 3b 1. Push the wire into the connector to relieve the tension on the primary lock. Q 2. Insert the tool on top of the terminal and lift the primary lock up, then pull the terminal out of the connector. -----__.- MINIATURE SCREWDRIVER, 1.19 mm 13/64”) wide tip (commercially available) Voltage Conversion Module (VCM) Combinations la, Za, 3a, 4a Position a 2-1/2 inch piece of the corrugated protector between the VCM and harness A. Position seam as shown. Secure the corrugated protector to harness A with black vinyl electricians tape. Tape the complete length of the corrugated protector, then use cable ties to secure the VCM to harness A.

BLACK VINYL ELECTRICIANS TAPE CORRUGATED PROTECTOR CABLE TIES (2) Tape the complete length of cormgated material. \ Date of Issue: June 2003 0 2001-2003 American Honda Motor Co., Inc. 511 9