Perkins — Page 1

N38143 Data Data - 6TG2AM 1500 rev/min...........................1800 rev/min Basic Technical Data Prime power.........................................92.5kW (124 hp).......................99kW (133 hp) Number of cylinders.................................................................6 Cylinder arrangement...........................................................In-line Cycle..................................................................................

4 stroke lnduction system............................................................Turbocharged Bore..............................................................................100mm (3.937”) Stroke............................................................................127mm (5.00”) Compression ratio................................................................. 16:1 Cubic capacity..........................................................

5.99 litres (365.0 in 3 ) Valves per cylinder...................................................................2 Direction of rotation........................................Anti-clockwise viewed on flywheel Firing order.....................................................................1, 5, 3, 6, 2, 4 Total weight (wet).....................626 kg (1380 lbs) engine only including starter and generator. Cooling System The coolant shown below is mandatory for use in all climates to ensure that adequate levels of corrosion inhibitor are present. It will give frost protection to -37 O C (-34.6 O F).

Coolant..............50% inhibited ethylene glycol or 50% inhibited propylene glycol with 50% fresh clean water Fresh water flow ................................................123 l/min (32.5 US galls/min) 150 l/min (40 US galls/min) Coolant pump speed and method of drive................... 1:1 Gear driven System capacity......................................................24 litres (6.3 US galls) Pressure cap setting......................................................50 kPa (7 psi) Protection switch setting................................................96 O C (205 O F) Sea water pump type..........................Jabsco gear driven model 25.4mm (1”) full cam.

Sea water suggested inlet hose diameter......................32mm (1.25”) Sea cock....................................... Full flow 25.4mm (1.00”) max lift of seawater pump 2m ................................................... Full flow 38.1mm (1.25”) max lift of seawater pump 4m Strainer.............................. A raw water strainer must be included in the suction side of the circuit. Maximum sea water temperature...................................38 O C (100 O F) Sea water flow.....................................................71 l/min (18.8 US galls/min) 91 l/min (24 US galls/min) Fuel System Recommended fuel specifications.........BS2869 Class A2 ASTM D 975 Number 2D.

Cetane number...............................................................45 minimum Fuel injection pump........................Stanadyne rotary and electric stop. (Energised to run). Fuel lift pump.............................................................. AC Delco type LU Delivery/hour ................................ 122 l/hr (32 US galls/min........ 134 l/hr (35 US galls/min) Pressure ......................................................................30 kPa (4.4 PSI) Page 85