Komatsu — WHEN REQUIRED

. MAINTENANCE SERVICE PROCEDURE SERVICE PROCEDURE WHEN REQUIRED CHECK, CLEAN AND REPLACE AIR CLEANER ELEMENT WARNING NOTICE 4 - 20 If in spection, c leaning, or maintenance is carried out with the engine r unning, dirt will get into th e engine and damage it. Be e to stop th e engine before carrying ou t these ope rations. If c ompressed air is us ed, ther e is danger that dirt m ay be blo wn around and cause serious injury ays use pr otective glasses, dust mask , and other protecti ve equipment. Wh en pulling o ut the cl eaner element at a high place or a bad f oothold, take care not fall after the e lement comes off suddenly.

CHEC KING If the yellow pis ton in th e dust indicator (1) overlaps the red zone Alway zone o s wait for the yellow piston in the dust indicator to overlap the red n the outside before cleaning the element. If the indicat unable element is or overlap to displa cleaned frequently before the yellow piston in the dust s the red zone on the outside, the air cleaner will be y its normal performance and the cleaning effect will becom e poor. In add ition, the fr equency of dust stuck to t he element falling i nside the inner e lement dur ing the c leaning operation will increas e. CLEANING OR REPLACING OUTER ELE MENT 1. O 2. R pen the le ft engin e side cover.

emove thr ee clips (2), then remov e cover (3