3. Adjust: throttle lever free play b 2 MMM M M MMM M M MMM M M MMM M M MMM M M MMM M MMM First step: a. Slide back the rubber cover 1 . b. Loosen the locknut 2 on the throttle body side. c. Turn the adjusting nut 3 in direction a or b until the correct free play is obtained. 1 3 a d. Tighten the locknut. e. Slide the rubber cover to its original posi- tion. _ If the free play cannot be adjusted here, adjust it at the throttle lever side of the cable. NOTE: Second step: f. Slide back the rubber cover 4 . g. Loosen the locknut 5 . h. Turn the adjusting bolt 6 in direction c or d until the correct free play is obtained. i. Tighten the locknut. j.
Slide the rubber cover to its original posi- tion. WARNING _ After adjusting the free play, turn the han- dlebar to the right and left to make sure that the engine idling speed does not increase. LLL L L LLL L L LLL L L LLL L L LLL L L LLL L LLL 4. Install: left side panel Refer to “SEAT AND SIDE PANELS”. 3 - 26 ADJUSTING THE THROTTLE LEVER FREE PLAY CHK ADJ Direction a Free play is increased. Direction b Free play is decreased. Direction c Free play is increased. Direction d Free play is decreased.