EBS00053 ADJUSTING THE SPEED LIMITER The speed limiter keeps the throttle from becoming fully-opened even when the throttle lever is applied to the maximum position. Screwing in the adjusting screw stops the engine speed from increasing. 1. Measure: speed limiter length a Out of specification Adjust. 2. Adjust: speed limiter length MMM M M MMM M M MMM M M MMM M M MMM M M MMM M MMM a. Loosen the locknut 1 . b. Turn the adjuster 2 in direction b or c until the specified speed limiter length is obtained. c. Tighten the locknut. _ Particularly for a beginner rider, the speed limiter should be screwed in com- pletely. Screw it out little by little as their riding technique improves.
Never remove the speed limiter for a beginning rider. For proper throttle lever operation do not turn out the adjuster more than 12 mm (0.47 in). Also, always adjust the throttle lever free play to 3.0 ~ 5.0 mm (0.12 ~ 0.20 in). WARNING LLL L L LLL L L LLL L L LLL L L LLL L L LLL L LLL 3 - 27 ADJUSTING THE SPEED LIMITER CHK ADJ Speed limiter length Less than 12 mm (0.47 in) Direction b Speed limiter length is decreased. Direction c Speed limiter length is increased.