EBS00057 CHECKING THE SPARK PLUG 1. Remove: right side panel Refer to “SEAT AND SIDE PANELS”. 2. Disconnect: spark plug cap 3. Remove: spark plug 4. Check: spark plug type Incorrect Change. 5. Check: electrode 1 Wear/damage Replace. insulator 2 Abnormal color Replace. Normal color is a medium-to-light tan color. 6. Clean: spark plug (with a spark plug cleaner or wire brush) 7. Measure: spark plug gap a Use a wire gauge or thickness gauge. Out of specification Regap. 8. Tighten: spark plug NOTE: _ Before installing a spark plug, clean the gasket surface and plug surface. 9. Connect: spark plug cap 10.Install: right side panel Refer to “SEAT AND SIDE PANELS”.
3 - 28 CHECKING THE SPARK PLUG CHK ADJ Standard spark plug CPR7EA-9/NGK Spark plug gap 0.8 ~ 0.9 mm (0.031 ~ 0.035 in) T.R. 13 Nm (1.3 m · kg, 9.4 ft · lb)