Flywheel puller 90890-01362 Heavy duty puller YU-33270-B 2 EBS00262 CHECKING THE STATOR COIL AND CRANKSHAFT POSITION SENSOR 1. Check: stator coil 1 crankshaft position sensor 2 Damage Replace the crankshaft position sensor/stator assembly. 1 1 EBS00263 CHECKING THE STARTER CLUTCH 1. Check: starter one-way clutch 1 Cracks/damage Replace. bolts 2 Loose Replace with a new one, and clinch the end of the bolt. LT 2 NOTE: _ The arrow mark on the starter clutch must face inward, away from the AC magneto rotor. Й Starter clutch bolt 30 Nm (3.0 m · kg, 22 ft · lb) LOCTITE ® T R . И . MMM M M MMM M M MMM M M MMM M M MMM M M MMM M MMM a.
Install the starter wheel gear to the starter clutch, and hold the starter clutch. b. When turning the starter wheel gear counter clockwise И , the starter clutch and the wheel gear should be engaged. If not, the starter clutch is faulty. Replace it. c. When turning the starter wheel gear clock- wise Й , the starter wheel gear should turn freely. If not, the starter clutch is faulty. Replace it. LLL L L LLL L L LLL L L LLL L L LLL L L LLL L LLL 4 - 46 AC MAGNETO ENG