2. Check: starter idle gear teeth starter wheel gear teeth Burrs/clips/roughness/wear Replace. 3. Check: starter wheel gear (contacting surface) Damage/pitting/wear Replace. CHECKING THE TORQUE LIMITER torque limiter Damage/wear Replace. NOTE: Do not disassemble the torque limiter. EBS00268 INSTALLING THE AC MAGNETO ROTOR 1. Install: stator coil 1 1 a LT b NOTE: Align the projection a on the stator coil with the slot b in the AC magneto cover. 2. Apply: Sealant 1 (into the slit) 1 Yamaha bond No. 1215 90890-85505 (Three bond No.1215 ® ) 4 - 47 AC MAGNETO ENG T.R. 7 Nm (0.7 m · kg, 5.1 ft · lb) T.R. Stator coil bolt 7 Nm (0.7 m · kg, 5.1 ft · lb)