3 3.1 Commissioning Engine Operation Check battery and cable connections, see 6.7.1. Trial run - After the engine has been prepared, let it run for about 10 minutes without load. After the engine has been turned off - Check the oil level and top up if necessary, see 6.1.2. - Tighten the V-belt, see 6.5. Breaking-in During the break-in phase - about 200 operat- ing hours - check the oil level twice a day. After the engine is broken in, checking once a day will be sufficient. Commissioning conserved engines Remove conservation materials as outlined in section 8.1 3.1.4 Filling/Venting the Cooling System 3.1.5 Other Preparations During and after trial run - Check the engine for leaks.
Unit engine (with frontal radiator) See section 6.3.8. 1012/1013 See section 6.3.4 1012 E/1013 E See section 6.3.6