Engine Operation 3.2 Starting 25745 0 Starting without Cold-Start Aid – Pilot lights go out. Disengage the clutch to separate the engine from the driven equipment. Move speed control lever 1 in direction of arrow at least to middle speed position. Move shutdown lever 2 to operating position (in opposite direction of arrow). Before starting, make sure that nobody is standing in the imme- diate vicinity of the engine or driven machine. After repair work: Check that all guards have been replaced and that all tools have been removed from the engine. When starting with glow plugs, do not use any other starter substance (e.g. injection with start pilot). Doing so could result in an accident.
Important: Never start the engine with speed governor removed. Disconnect battery. Do not actuate the starter for more than 20 seconds. If the engine does not catch, wait a minute then try again. If the engine does not catch after two attempts, refer to the Diagnosis Chart (see 7.1). 3.2.1 Electric Starting ! 3 26245 0 26245 0 25745 0 25745 0