Komatsu — 10,000 HOURS LUBRICATION AND MAINTENANCE CHECKS

Lubrication & Service - Section 40 OM4066 Page 40-4 6000 HOURS MAINTENANCE CHECKS Maintenance for 500 hour Inspection Checks should also be performed at this time. 10,000 HOURS LUBRICATION AND MAINTENANCE CHECKS EVERY 500 HOUR INSPECTION (Continued) Item Task Alternator Air Intake Silencer Inspect visible air flow paths for any debris or mud. Replace silencer element if any defects are found. Do not remove any baffles or screens to perform inspection. Inspect the mounting hardware between each element, supporting duct work, and mounting posts. Look for any cracks forming around the mounting hardware. Replace any loose, broken, or missing hardware.

Replace the silencer element if cracking is found. Inspect the silencer element case for cracks. Pay particular attention to weld seams. Replace silencer element if any defects are found. Note: The mounting configuration of the alternator silencer blocks visibility to the internal components. Do not disassemble duct work, mounting hardware, or casings around the silencer element to perform inspections. If the duct work is removed for other maintenance reasons perform the inspection below. Inspect visible baffles for cracks along their connection joints or damage to the main surfaces. Do not remove any baffles are screens to perform inspection.

Replace silencer element if any defects are found. EVERY 6000 HOUR MAINTENANCE Item Task Engine Side Panels Remove the attenuators for inspection and cleaning. Refer to Engine Side Panels in the Chassis Sound Attenuation System section for detailed service instructions. Engine Belly Pan Remove the attenuators for inspection and cleaning. Refer to Engine Belly Pan in the Chassis Sound Attenuation System section for detailed service instructions. Radiator Silencer Remove the attenuators for inspection and cleaning. Refer to Radiator Silencer in the Chassis Sound Attenuation System section for detailed service instructions.

Rear Engine Compart- ment Enclosure Remove the attenuators for inspection and cleaning. Refer to Rear Engine Compartment Enclosure in the Chassis Sound Attenuation System section for detailed service instructions. EVERY 10,000 HOUR MAINTENANCE Item Task Measure Machine Sound Level Measure the sound levels of the machine while working. Refer to Chassis Sound Attenuation System section for detailed instructions.