Komatsu — CHECK BEFORE STARTING ENGINE

. OPERATION OPERATION DOES BODY POSITIONER OPERATE NORMALLY? 1. Turn the starting switch key to START position and start the engine. 2. Operate the dump control lever to RAISE position, then release it. Check that there are no loose or broken cab mount pins (2) (left, right: 1 each). is pressed. If the horn does not sound, ask your Komatsu distributor for repair. 3 - 78 that the dump bod y stops before the end of the st roke. REMARK If the dum p body reaches the end of the stroke, the contact of the body will c ause an impact.

T he body positioner unctionin the dump body stops without any impact ARE THE CAB MOUNTING BOLTS AND PINS ARE FREE FROM LOOSENESS AND BREAK Check that there are no loose cab mounting bolts (1 ) (left, ri ght: 4 each). Tig hten any loose bolt Tightening torque: 245 to 309 Nm {25 to 31.5 kgm, 1 80 to 22 7 lbft} CHECK FUNCTION OF HORN o ON position. 1. Turn th e starting switch t 2. Check that the horn soun ds immediately when th e horn b utton