Komatsu — CHECK BEFORE STARTING ENGINE

. OPERATION OPERATION ADJUSTMENT BEFORE OPERATION ADJUSTING OPERATOR'S SEAT WARNING (A) Fore-and-aft adjustment Move lever (1) up, move the seat to the desired position, then release the lever. Fore-and-aft adjustment:180 mm (7.1 in) [10 mm (0.4 in) x 18 stages] (B) Adjusting seat angle Move lever (2) up and push down on the rear of the seat to tilt it backward. Move lever (2) down and push down on the front of the seat to tilt it forward. Adjustment range: 13 deg. (Front tilt, rear tilt: 4 stages each) (C) Setting seat for operator's weight Sit on the seat and adjust the strength of the suspension with valve (3). Adjustment range (Target): 50 kg (110 lb) to 120 kg (265 lb) Push:

Suspension is strengthened. Pull: Suspension is weakened. NOTICE 3 - 79 Park the machine in a safe plac e and stop the engine when performing adjustment of the operato Adjust the seat before starting operations or when changing operators. Adjust the position of the operat or's seat so that you can depress the brak e pedal fully with your ba ck against the seat backrest. (D) Adjusting backrest angle Move lever (4) up and move th When doing this, keep your ba If your back is not against the seat back, the seat back may spring Adjustment range: 66 deg. to t 30 deg.

to r If the seat back is reclined too far, t he seat back may hit the rear glass, so u se it in a position where it does not contact the g lass.