. OPERATION OPERATION ADJUST SEAT BELT WARNING REMARK the 3 - 81 Before fastening t he seat belt, check th at there is no problem in the securing brackets o r belt. If ther e is any wear or d amage, replace. Even if there are n o signs of damage, r eplace bel ts in accordance with the fo llowing sc 5 years after the d ate of seat belt manufacture, or every 3 years afte r the star t of actual usage, which ever dat e comes s ooner. Adjust and fasten the seat belt before starting to Always use the se at belt when travelin D o not use the se at belt with either hal f of the bel t twiste The date of seat b elt manufacture att ached to the sea t belt is t he start of the 5-ye ar period.
It is not the start of the 3-year period of ac Fastening and remov ing belt that it is tight without being too tight. t, depress the brake pedal fully, and adjust Fasten the belt so that it is tight witho ut being too tigh 1. 2. 3. 1. Sit on the sea t, depress the brak e pedal f ully, an adjust seat so that yo ur back is pressed against t he backrest. 2. Sit in the seat, pull the right side of the belt , then i nsert ton (1) into buckle (2) until a click is h eard. 3. When removin g the belt, press t free the belt. Fit the belt so that it follows your body and is not