Komatsu — CHECK BEFORE STARTING ENGINE

. OPERATION OPERATION ADJUST STEERING WHEEL TILT WARNING (from center of steering wheel) Up: 33 mm (1.3 in) Down: 17 mm (0.7 in) NOTICE but a tightening direction (A). 3 - 82 Stop the machine before adjusting the t ilt of the steering wheel. If t his operation (adjustment) is carried out while the machine is moving, i t may lead to a serious accide The tilt o f the steering wheel can b e adjusted to the front an d rear, and up and down. Pull lever up an d set the steering wheel to the desired position, then push lever d wheel securely in position. Amount of adjustment: Front/rear: 80 mm/80 mm (3.2 in/3. Do not o perate the lever (1) continuous Lever op erating force:

98.1 N to 127 N { The lever (1) may become loose or get out of angle. In this case, A sk your Komatsu distributor to perfor The bolt s (2) and (3) on steering c olumn are the left-hand s crew. If they a re screwed counterclockwi se, it is not a loosening di rection