Komatsu — HANDLING TIRES

. OPERATION OPERATION HANDLING TIRES PRECAUTIONS WHEN HANDLING TIRES WARNING It is Tire size Inflation pressure [MPa (kg/cm 2 , PSI)] 29.5-R25 VLT (standard) 0.37 (3.8, 54.0) 29.5-R25 VKT (standard) 29.5-R25 XADT (standard) 0.39 (4.0, 56.8) 29.5-R25 RL2+ (standard) 0.40 (4.1, 58.2) 875/65 R29 (if equipped) 0.44 (4.5, 63.9) NOTICE If the tires are used when the inflation pressure is less than the value given in the table above, the rim may be damaged. Always keep the tire inflation pressure within +0 to +0.03 MPa (0.3 kg/cm 2 , 4.3 PSI) of the value in the table above. The maximum travel speed must be kept to less than 40 km/h (24.9 MPH).

Stop for at least one hour for every one hour of travel to allow the tires and other components to cool down. Never travel with water or dry ballast in the tires. 3 - 116 To ensure w tires. ne Tires where the bead wire has been cut, bro ken, or greatly def Excessively carcass ply worn tire (excludin s where more than 1/4 g the breaker) is expo of the circumference of the sed Tires Tires where where damage ply separ to the carcass exceeds ation has occurred 1/3 of the tire width ass Tires where radial cra cks extend to the carc Tires and t where he tire there is a cannot w bnormal ithstand deterioration use.

, deformation, and damage, Consul our Komats dangerou s to jack up the machine withou t taking due care PRECAUTIONS FOR LONG DISTANCE TRAVEL If the machine travels continuously at high speed for a long distance, there will be a marked increase in the If t he machin e travel s continuously at h the generatio n of heat in the tire. This may ca use premature d amage to the tire, so be careful o f the following points. Travel only when e mpty. tion pressure before starting for the day when the tires are cold, and adjust to the following tire inflation pressure when traveling. Check the tire infla inflation pressure. Do n ot reduce the tire inflation pressur e when traveling