. OPERATION TROUBLESHOOTING CONNECTING THE BOOSTER CABLES of the problem machine. STARTING THE ENGINE CAUTION 3 - 136 Keep the starting sw itch of the normal machi ne and failed mac Connect the booster cable as follows, in the order of the numb ers marked in the figur 1. Connect 1 clip of booster cable (A) to the positive (+) termi of the problem m achine. er clip of booster cable (A) to the positive ormal machine. 2. Connect the oth terminal of the n 3. Connect 1 clip of booster cable (B) to the negative (-) termi of the normal ma chine. 4.
Connect the othe r clip of booster cable (B ) to the engine blo Make sure that the park ing brake switch is at PAR KING position and th e gear shift lever is at N (n eutral) position for both normal machine a nd the proble m machine. 1. Make sure the cl ips are firmly connected to the battery term inals. MAX). 2. Start engine of th e normal machine and run it at High idle ( 3. Turn the starting switch of the failed mac hine to START po sition and start the eng If the engine doe sn't start at first, try aga in after 2 minutes or so. DISCONNECTING THE BOOSTER CABLES After t he engine has started, disconnect the b ooster cables in th e reverse of the order in which they were connected. 1.
Remove 1 clip of booster cable (B) from the engine block of t problem machine. 2. Remove the other clip of booster cable (B) from the negative terminal of the normal machine. 3. Remove 1 clip of booster cable (A) from the positive terminal of the normal machine. 4. Remove the other clip of booster cable (A) from the positive terminal of the problem machine. 1. Remove 1 clip of booster cable (B) from th e engine block of t he (-) (+) (+) problem machin e. 2. Remove the othe r clip of booster cable (B ) from the negative terminal of the n ormal machine. of booster cable (A) f ormal machine. rom the positive 3. Remove 1 clip terminal of the n 4.
Remove the othe r clip of booster cable (A ) from the positive