. MAINTENANCE SERVICE PROCEDURE MAINTENANCE SERVICE PROCEDURE reservoir tank, then add water to between FULL and LOW marks. (1), and if it is and clean it with 3. Open cover (2) at the right side at the rear of the operator's seat. 4 - 30 11. Drain the coolant from reservoir ta nk (4), flush th e inside of the CHECK LEVEL OF WINDOW WASHER FLUID, ADD FLUID Perform th is check if there is a ir in the window was her fluid. Check the window ow, fill wit h automob ile window wash er fluid Be carefu l not to let d irt or dust get in when adding When ope rating at b elow f reezing poi nt, use fluid w ith antifreeze.
CLEAN AIR CONDITIONER AIR FILTER f the air fil ter at the s uction port of the air conditioner unit or t he air filter at the fresh air intak e port become clogged he coolin g or heatin g capacity will dr op, so clean th e filters once a 1. Open cover (1) o n the side of the cab. 2. Pull o ut the ai r filter (FRESH filter) RESH compr essed air. 4. Pull o essed air t o blow off the du st or clean wit h a soft brush.