Komatsu — METHOD OF USING ACCURATELY

. ATTACHMENTS, OPTIONS HANDLING PAYLOAD METER HM 6 - 8 5. METHOD USING LOADING MO DE sing the loading mode (including external display lamp) e is maintained, the more accurate a measurement can be obtained. To obtain an accurate value u The better the loading plac Perform the work in a place will be poor. When loading, use the par Do not start loading until th When the equalizer bar is 1) If the equalizer bar is in accurate measurement ca 2) If the machine is stopped payload meter-HM detect bar and stopper. If the equalizer bar contac is shown on the display a flash. 3) If all the external displa loading.

4) If error code "F-FL" is disp until "F-FL" goes out, then 5) When moving the machin When stopping the machi completely, then shift the To obtain an accurate value u sing the loading mode (including e xternal d ispl ay lamp) The better the loading plac e is maintained, the more accurate a measure ment can be Perform the work in a place where the grade is within ±5 deg. If the grade is more than ±5 d eg., the accuracy king brake. Release the foot brake or retarder brake. e machine is completely stopped. in contact with stopper contact with the stopper, an nnot be obtained.

empty at the loading point, the s contact between the equalizer ts the stopper, error code "F-FL" nd all the external display lamps y lamps flash, do not perform layed, drive the machine forward stop the machine. e, set the gear shift lever to D. ne, wait for the machine to stop gear shift lever to N. When loading, use the par king brake. Release the foot brak e or retarder Do not start loading until th e machine is completely stopped. When the equalizer bar is 1) If the equalizer bar is in 6. DOWNLOADING 2900 cycles in memory. (Normally, enough for more than 1 month's work) The payload meter can store 2900 cycles in memory.

(Normally , enoug h for more than 1 month's w ork) If the data in memory exceed 2900 cycles, the newest data are written o ver the oldest d ata and ar e saved in memory. Before operating an d saving, download the data to a P C, then clea r the data.