SAFETY ENTERING AND EXITING THE MACHINE Use all hand holds and step plates on your machine. Never jump off or onto the machine. Before getting on the machine, wipe off any oil, grease, or mud from your shoes, or the machine’s rails, steps or platform. Keep these areas clean, and in good condition. Never get on or leave a moving machine. These actions may lead to serious injury. Always bring the machine to a full stop. Be sure machine is at a full stop, equipment lowered and parking brake set before entering or exiting machine. Never hold any control levers or the steering wheel when getting on or off the machine.
When getting on or leaving the machine, always face the machine and maintain a Three-Point Contact. It is defined as both feet on the steps and one hand on the handrails. Or, both hands on the handrails and one foot on the steps. CHECKING THE REAR VIEW MIRROR Make sure that the rear-view mirror is clean and correctly positioned. The operator should be able to see the rear of the machine, without mov- ing the upper body while driving the machine. If the mirror moves dur- ing operation, stop the machine and readjust the mirror before resuming work. If the mirror falls off the machine, stop the machine and make the needed repairs before continuing with work.
Check the rear view fre- quently while working, especially before backing up, to ensure that no person, fixed obstacles, or other machines are in the work area. WB140PS-2N WB150PS-2N 1-5