OPERATION IGNITION SWITCH The four positions of the ignition switch (17): Preheat OFF ON Start BLOWER SWITCH The blower switch (18) controls the blower motor operation, which has three speeds: Low Medium High The temperature switch (T) adjusts the temperature of the airflow deliv- ered inside the cab. Turning the knob clockwise increases the air tem- perature while turning the knob counterclockwise decreases the air temperature. The recirculation switch (R) blocks outside air from enter- ing the cab, causing the air within the cab to recirculate. Use the recircu- lation feature in extreme hot or cold weather, and when working in dusty areas.
Using different combinations of fan speed, temperature set- ting, and recirculation obtains the desired temperature within the cab. BACKHOE POWER CONTROL SWITCH This button (19) operates the selection of oil delivery from the hydraulic pump. Starting the machine automatically selects the POWER (switch illuminated), providing maximum power. Operat- ing the machine in the forward or reverse gear automatically can- cels the POWER mode. To return to the POWER mode, shift the gear lever to the neutral position. Pressing the button, the backhoe goes into the economy mode, reducing power.
This feature is used for excavating light material, operating optional attachments or using the backhoe for grading purpose. BACKHOE BOOM LOCK SWITCH This button (20) operates the boom lock. This function holds the backhoe in the parked position, preventing hydraulic drift of the backhoe unit. Use this feature when using the loader or traveling with the machine. OPTIONAL SWITCH LOCATIONS This switch location (21) is for optional equipment. 2-12 WB140PS-2N WB150PS-2N