OPERATION LOADER CONTROLS 1 Loader declutch control button 2 Differential lock button 3 Bucket open button 4 Bucket close button 5 6 Front end loader speed control button Kickdown button LOADER DECLUTCH CONTROL Pressing this button (1) transfers all engine power from the drive line to the loader hydraulics when lifting heavy loads.This feature should only be used on level ground. Do not press this button for more than 15 to 20 seconds. Do not press this button when traveling or operating on an incline or loss of control may result. DIFFERENTIAL LOCK Pressing this button (2) locks the drive axles together to prevent the wheels from spinning when operating in 1st or 2nd gear only.
To engage the differential lock, the system must disengage the drive line. Do not use engage this feature when traveling on slopes or loss of control may result. Remark Engaging this feature requires that the machine is stopped or traveling at a slow speed. This function does not work in 4th gear. BUCKET OPEN Pressing this button (3) opens the top half of the bucket. This action converts the loader bucket into a dozer blade. Or using the bucket for picking up items. BUCKET CLOSE Pressing this button (4) closes the top half of the bucket, allowing the operator to use the bucket for scooping and loading oper- ations. WB140PS-2N WB150PS-2N 2-13