Mack Trucks — Mack TerraPro LEU Series Operation Manual

INSTRUMENTS AND CONTROLS 59 Aftertreatment DPF Regeneration Required Icon — Illuminates when the Diesel Particulate Filter is becoming full and regeneration is needed. The icon flashes when the filter is full or overfull. Check Transmission Warning Indicator (If Equipped) — Only present on vehicles equipped with automatic transmission. Optional Tell-Tales Right-Hand Operation Indicator — Indicates that a right-hand drive mode has been enabled. Coolant Temperature Gauge — Indicates the temperature of the engine coolant. The normal operating temperature for Mack engines is between 77°C and 107°C (170°F and 225°F).

The driver will receive a warning if coolant temperature reaches 223°F and engine shutdown will occur at 227°F if the engine coolant temperature shutdown option is enabled. Optional Tell-Tales Aftertreatment DPF Regeneration Inhibit Icon Illuminates when the inhibit switch is turned on. It will allow the driver to know that the switch is in a inhibit position and a regeneration will not occur. Forced Neutral Indicator Illuminates when PTO is engaged and the truck is not moving. Turn Signal Indicator LH — Flash green when the turn signals are activated. High Beam Indicator (Blue) — Indicates that high beams are on. Turn Signal Indicator RH — Flash green when the turn signals are activated.

Engine Oil Level Indicator — If illuminated, immediately check the level of your engine oil. Water in Fuel Indicator (If Equipped) Illuminates when water accumulates in the primary fuel filter sediment bowl. Stop the engine and drain the fuel from the sediment bowl. 5. Speedometer/Odometer Indicates road speed in miles and/or kilometers per hour and total distance vehicle has traveled. 6. High Beam Indicator (Blue) — Indicates that high beams are on. 7. Turn Signal Indicators — Flash green when the turn signals are activated. 8. Fuel /DEF Gauge — Registers the fuel and DEF levels in the supply tank(s).