DISASSEMBLY AND ASSEMBLY SWING MACHINERY 12 DISASSEMBLY 1. Loosen drain plug and drain oil from swing machinery. Swing machinery case .......................................≈ 21.5 L 2. Remove mounting bolts, then lift off cover (1). 3. Remove thrust washer (2), then remove #1 sun gear (3). 4. Remove #1 carrier (4). 5. Disassemble #1 carrier as follows: A. Push in pin (5), and knock out shaft (6) from carrier (7). # After removing the shaft, remove pin (5). B. Remove thrust washer (8), gear (9), bearing (10), and thrust washer (11). PC300LL-6 30-13