hyundai R60WVS Pro — 5. GEAR BOX

(7) Coat the coupling surface of the gearshift cylinder (9) with loctite 510; fit the cylinder on the gear selector rod (19). Make sure that the sealant forms a continuous film around the locking holes. Assembly the screws (8), spreading loctite 242 on screws. (8) (9) Tighten screws (8) using a torque wrench setting of 4.89~5.4 kgf · m (35.4~ 39.1 lbf · ft ). (10) Fit the gear selector balls (3). Lubricate before installing. 7-61