hyundai R60WVS Pro — 5. GEAR BOX

(11) Fit the gear selector springs. Replace the springs (14) if they are weakened or bent. Coat the dowel (1) with loctite 510 and screw it until it is level with the cylinder. (12) (13) Fix the gear-in position switch (4) with washer (7) and O-ring (5), (6). Tighten with torque wrench setting of 3.57~5.09 kgf · m (25.8~36.9 lbf · ft ). (14) Engage the 1st speed and verify with a control device (tester) that the switch 1st speed gives signal and that the switch 2nd speed is disabled. Repeat the operation on the switch 2nd speed. 7-62