hyundai R60WVS Pro — 5. GEAR BOX

Fit the flange (3) on the shaft (24), seating completely. (48) (49) Lubricate the O-ring (2) with grease and fit in the flange (3) seating. Spread with loctite 242 the lock nut (1) and fit. (50) Tighten the lock nut (1) to a torque of 28.6~31.6 kgf · m (207~229 lbf · ft ). (51) Coat the coupling surface of the gearshift cylinder with loctite 510 ; fit the cylinder on the gear selector rod. Make sure that the sealant forms a continuous film around the locking holes. For more details, see : INSTALLATION OF HYDRAULIC GEAR CONTROL 7-86