hyundai R60WVS Pro — 7. AXLE

⑪ Check that the O-rings (17) (15) of the axle unit are in good condition ; lubricate the seats of the seals and fit the steering cylinder (3). ⑫ Lock the cylinder by cross- tightening the screws (3). · Torque wrench setting : 11.8~13.1 kgf · m (85.3~94.8 lbf · ft ) ⑬ Apply loctite 242 to the thread and con- nect the steering bars by screwing the terminals onto the piston stem. · Torque wrench setting : 24.5~27.5 kgf · m (177~199 lbf · ft ) Versions with coupling require that the rim of the articulation is riveted onto the surfaces of the piston stem. ⑭ Insert the pins (18) in the steering case and lock into position using a torque wrench setting of 27.5~30.6 kgf · m (199~221 lbf · ft ).

7-129