hyundai R60WVS Pro — 7. AXLE

Introduce the stop ring (4) and ensure that it sets in the seat of cylinder (3). ⑧ To insert the heading not to go beyond with the ring of gasket the hole of feeding because it could be cut. ⑨ Using two screwdrivers or levers, force the head until it is seated against the stop ring (4). Fit the snap ring (1) on the head (2). Make sure that the snap ring (1) is securely fastened in its seat. If necessary, force it into its seat using a drift and a hammer. ⑩ Renew at each reassembly. 7-128