hyundai R60WVS Pro — 7. AXLE

④ Prepare piston (5) by fitting it with mag- netic ring (11), anti-extrusion ring (10) and piston seal (13). To ease installation, lubricate with grease. ⑤ Center the shaft on the cylinder (3) so that it fits into the piston (5). Apply a little grease to seals and cylinder. ⑥ Push the piston (5) into the cylinder for 100 mm using a plastic hammer. ⑦ Apply grease to head (5) seals, fit the head onto the piston and push it into the cylinder (3) using a plastic hammer. Insert the head as to line it up with the edge of the cylinder. 7-127