③ Check nominal dimension “I” as marked on the pinion. Add up to or subtract from “I” the variation indicated as “Y” to obtain the actual centre distance “I”. Example : I=INT ± Y=98 - 0.1=97.9 mm C61 = Match part number C61=bevel gear set matching number (-0.1)=Y variation from the theorical I =98 ④ ⑤ Calculate shims “S” for insertion under the thrust block of the inner bearing using the following formula : S = X-(I + D) where : X = fixed dimension I = actual pinion center distance D = Total bearing thickness ; Example : S = 128 - (97.9 + 29.45) = 0.65 mm ⑥ Using special tool T11. Insert the thrust block of the bearings (4) and shims (10). 7-157