Before starting the next stage, make sure that the thrust block has been completely inserted into its seat. ⑦ Using special tool T11. Insert the thrust block of the bearings (4) and shims (10). Calculating pinion bearings rolling Calculating pinion bearings rolling torque torque Introduce tool T12 complete with bear- ings (4) and (14) into the main body (12); tighten by hand until a rolling torque is definitely obtained. ⑧ ⑨ Introduce the tracer of a depth compara- tor “DDG” into either side hole of tool T12. Reset the comparator with a preload of about 3 mm . 7-158