hyundai R60WVS Pro — 7. AXLE

⑬ Calculate the shim S2 to be inserted. Example : S2 = H + X1 = 3.01 mm where X1 = fixed value to obtain = 0.07~0.08 mm ⑭ Heat the bearing to 100˚C and assemble it to the pinion shaft. ⑮ Fit the pinion (11), shim “S2” (10) and distance piece (5) (9) in the main body (12). The finer shims must be placed in- between the thicker ones. 16 Heat the external bearing (14) to a temperature of about 100˚C and fit it on to the pinion (11) so as to complete the pack as shown in the figure. Lightly lubricate bearing with SAE85W90 oil. 7-160