17 Apply loctite 270 to the thread of the ring nut (8) and screw the nut onto the pinion. 18 Apply onto the pinion (11) the bar-hold and with the help of a torque meter, check the torque of the pinion (11). · Torque : 50.9~71.4 kgf · m (368~516 lbf · ft ) If torque exceeds the maximum value, then the size of shim “S1” (4) between the bearing (9) and the distance piece (3) needs to be increased. If torque does not reach the set value, increase the torque setting of the ring nut (10) in different stages to obtain a maximum value of 50.9 kgf · m (368 lbf · ft ). If torque does not reach the minimum value, then the size of shim “S1” (4) needs to be reduced. 7-161