hyundai R60WVS Pro — 7. AXLE

RING AND PINION ADJUSTING RING AND PINION ADJUSTING 6) 1 2 3 18 4 5 8 9 10 11 6 7 17 12 16 15 14 13 (1) Setting of the crown wheel and pinion Setting of the crown wheel and pinion Insert the thrust block of the bearing (6) opposit side of the crown wheel shims (Sb) (7) of an initial thickness of about 0.8 0.8 mm mm . (2) Insert the thrust block (6) and the shims (Sb) (7) into the arm. Check to be at end of stroke. 7-173