hyundai R60WVS Pro — 7. AXLE

⑭ Position the differential unit in the central body with the help of a bar and fit the middle cover. Thoroughly check the state of the O-ring and make sure that the cover is fitted with the oil discharge in the lower posi- tion. ⑮ Lock the middle cover with screws. · Torque wrench setting for screw : 2.43~2.67 kgf · m (17.6~19.3 lbf · ft ) 16 Check that the positioning of the sealing ring on the arm is intact; install the com- plete arm. Lock it into position using two facing screws and washers. 7-172