hyundai R60WVS Pro — 7. AXLE

③ Setting of the crown wheel and pinion Setting of the crown wheel and pinion Insert thrust block (4) of the bearing shims (Sc) (3) of an initial thickness of about 0.75 mm . Insert the thrust block and the shims into the arm. Check to be at end of stroke. ④ Insert complete differential (5). Do not damage the seat of the O-ring with the gearwheel. ⑤ Check the O-ring (2) and grease. ⑥ Lock the middle cover (5) with screws (4). · Torque wrench setting for screw : 2.47~2.67 kgf · m (17.9~19.3 lbf · ft ) 7-225