⑦ Apply torque meter TM to pinion nut and check that torque will increase by 0.04~0.06 kgf · m as a result of differential bearing preload. · Example : pinion torque : 0.08~0.12 kgf · m (0.58~0.87 lbf · ft ) · Pinion + differential torque : 0.12~0.18 kgf · m (0.87~1.3 lbf · ft ) ⑧ Position comparator on the center of one of the crown teeth, preset it to 1 mm and reset it to zero. Manually move the crown in both direc- tions to check the existing clearance between pinion and crown. · Gap = 0.13~0.20 mm ⑨ Install the crown wheel side arm (1) with- out half-axle. To check the torque of the differential, neither of both halfaxles must be installed.
⑩ Temporarily insert all screws of the arm (18). 7-226