hyundai R60WVS Pro — 7. AXLE

20 Make positional marks across nut (1) and pinion (11) tang; then remove nut and flange (2). 21 Apply Arexons rubber cement to the outer surface of the new seal ring (3) and fit ring in the main body (12) using driver T9. 22 Oil seal ring lips and install flange (2). Mount O-ring (6) and apply loctite 270 to pinion tang; tighten nut (1). 23 Tighten the nut until the match marks made at stage “a” line up. 7-237