hyundai R60WVS Pro — 9. TURNING JOINT

2) 2) DISASSEMBLY DISASSEMBLY Before the disassembly, clean the turning joint. Loosen the bolts (16), washer (17) and remove cover (3). 16 17 3 (1) (2) Remove shim (6) and O-ring (7). 6 (3) Remove retainer ring (12), spacer (4) and shim (5). 10 12 4 5 (4) Place hub (2) on a V-block and by using a wood buffer at the shaft end, hit out shaft (2) to about 1/2 from the body with a hammer. Take care not to damage the shaft (1) when remove hub (2) or rest it sideway. Put a fitting mark on hub (2) and shaft (1). Wooden block Secure with hand V block Work bench Remove wear rings (11), thirteen slipper seals (7) and O-rings (8, 9) from hub (2). (5) 11 7 11 9 8 2 7-254