3) 3) ASSEMBLY ASSEMBLY Clean all parts. As a general rule, replace oil seals and O-ring. Coat the sliding surfaces of all parts with engine oil or grease before installing. Fix wear rings (11), thirteen slipper seals (7) and O-rings (8, 9) to hub (2). (1) 11 7 11 9 8 2 Set shaft (1) on block, tap hub (2) with a plastic hammer to install. (2) 1 2 (3) Fit shim (5), spacer (4) and retainer ring (12) to shaft (11). 6 (4) Fit O-ring (7) to hub (2). 10 12 4 5 7-255