hyundai R60WVS Pro — 11. WORK EQUIPMENT

2. REMOVAL AND INSTALL 2. REMOVAL AND INSTALL 1) 1) BUCKET ASSEMBLY BUCKET ASSEMBLY (1) (1) ① Removal Removal Lower the work equipment completely to ground with back of bucket facing down. ② Remove nut (1), bolt (2) and draw out the pin (4). 2 4 1 ③ Remove nut (1), bolt (2) and draw out the pin (3) then remove the bucket assembly. · Weight : 170 kg (370 lb ) 2 3 1 (2) (2) ① Install Install Carry out installation in the reverse order to removal. When aligning the mounting position When aligning the mounting position of the pin, do not insert your fingers in of the pin, do not insert your fingers in the pin hole. the pin hole. Adjust the bucket clearance. For detail, see operation manual.

7-277