hyundai R60WVS Pro — 11. WORK EQUIPMENT

3) 3) BOOM CYLINDER BOOM CYLINDER (1) (1) ① Removal Removal Remove arm and bucket assembly. For details, see removal of arm and bucket assembly. Remove boom cylinder assembly from boom. For details, see removal of arm cylinder assembly. ② ③ ④ Disconnect head lamp wiring. Disconnect bucket cylinder hose (2) and arm cylinder hose (1). 1,2 When the hose are disconnected, oil When the hose are disconnected, oil may spurt out. may spurt out. ⑤ Sling boom assembly (3). ⑥ Remove bolt (3), nut (4) and pull out the pin (5) then remove boom assembly. · Weight : 310 kg (680 lb ) When lifting the boom assembly always lift the center of gravity.

3,4,5 (2) (2) ① Install Install Carry out installation in the reverse order to removal. When lifting the arm assembly, always lift the center of gravity. Bleed the air from the cylinder. 7-279