TESTING AND ADJUSTMENTS CHECKING THE ENGINE SPEED CHECKING THE ENGINE SPEED When checking the engine rpm , always be very careful not to touch parts that reach high temperatures and not to get entangled in rotating elements. # Check the engine speed after the following condi- tions have been reached: Temperature of engine cooling water: 68 80 °C. Oil temperature: 45 55 °C. A 1 1 - Mount and connect the tachometer A1 . # If the stroboscopic tachometer A2 is used, remove plug (1). 2 - Start the engine and check: Low idling without load (accelerator lever in “mini- mum” position). High idling without load (accelerator lever in “ma- ximum” position). # Low idling: 1100 50 rpm # High idling:
2975 50 rpm # If the minimum and maximum speeds do not fall within permissible limits when the engine is without load, check the position locks of the accelerator le- ver, and the sheathing of the accelerator well, be- fore carrying out any tests under load. (See «ADJUSTMENT OF THE ACCELERATOR LEVER»). Engine rpm with the pumps under load. # Only for Pattern Change version. Checkthat thePattern change valve is in “ISO” mo- de. # Max. speed with parking brake inserted and travel lever at full stroke (forward): 2800 2950 rpm # Max. speed with parking brake inserted, travel le- ver at full stroke (forward) and raising arm at the end of stroke: SK714-5: 2180 2450 rpm SK815-5:
2250 2500 rpm # If engine efficiency does not fall within permissible limits, have the engine checked by an authorised workshop. RKSA0010 A 2 1 RKSA0020 Min Max RKS01191 20-15 SK714-5 SK815-5