REMOVAL AND INSTALLATION CAB REMOVAL OF THE CAB 1 - Remove the complete working equipment. (For details, see «REMOVAL OF THE WORKING EQUIPMENT»). 1 1 2 2 - Loosen thenuts(1)andtilttherearpanel(2)towardsthe front of the machine. RKSA0520 1 1 3 - Disconnect the connectors (3) from the cab cabling (4) and release the engine cabling (5) from its retaining clamps. 3 5 4 RKSA0530 4 - Tilt the cab. (For details, see «TILTING THE CAB»). 5 - Disconnect the four pipes (6) on the RH side, the two servo-control feed-pipes (7) and the four pipes (8) on the LH side. # To disconnect the pipes, remove the retainer (9) push the pipe (6) completely inside the union (10) and extract the pipe (6).
# Markthe tubestoavoidexchangingthem duringre- assembly. 1 5 6 7 8 RKSA0540 6 - Pull out the cab cabling (5). 10 9 5 6 RKSA0550 30-22 SK714-5 SK815-5