REMOVAL AND INSTALLATION FINAL DRIVE REMOVAL OF THE FINAL DRIVE 1 - Disconnect the gearing chains (1) from the final drive (2). (For details, see “REMOVAL OF WHEEL HUB”). 2 - Remove the complete hydraulic pump. (For details, see “REMOVAL OF HYDRAULIC PUMP”). 2 RKSA0820 1 3 - Disconnect from the final drive (2) the supply pipes (3), the speed increment pipe (4) and the drainage pipe (5). # Plug the tubes to prevent entry of impurities. 5 2 3 4 RKSA0830 4 - Attach the final drive (2) to some hoisting tackle and ap- ply a slight tension to the ropes. 2 RKSA0840 5 - Loosenthe10screws(6)andtakeoutthecompletefinal drive (2).
# Check the condition of the O-ring (7) and substitute a new one if necessary. 2 7 Final drive: 54 kg 6 RKSA0850 30-39 SK714-5 SK815-5