REMOVAL AND INSTALLATION WORK EQUIPMENT CYLINDERS 5 - Raise the cylinder and hook the piston rod to the mobile group of the tool A . 6 - Extract the piston rod group (4) from the cylinder. 7 - Remove the cylinder (2) and the piston rod group. 4 A 2 RKSA1090 8 - Lock the complete piston rod (4) onto the apparatus A . 9 - Attach the socket wrench E to the lock nut (5) of the pi- ston (6) and, using the dynamometric tool with a mul- tiplier D , remove the nut. # Socket wrench measurement: 32 mm 4 6 10 - Take all the groups to pieces and remove all the seals, guard rings and guide rings. 5 D E The seals, guard rings, and guide rings cannot be used again. RKSA1100 30-45 SK714-5 SK815-5