REMOVAL AND INSTALLATION WORK EQUIPMENT CYLINDERS ASSEMBLY OF THE WORK EQUIPMENT CYLINDERS # Take great care not to damage the seal and the sliding surfaces. # Prepare each individual component before commen- cing the final assembly. 1. Assembly of the cylinder head 7 F 1 - Position the guard ring (7) and, using a press and the push rod F , press it home in the head (3). # Check the orientation carefully. 3 3 RKSA1110 2 - Mount the snap ring (8). 3 - Using the tool G , mount the lip-seal (9). # Check that the lips face into the cylinder. 8 G 9 RKSA1120 4 - Mount the O-ring (10), the anti-extrusion ring (11) and the O-ring (12) onto the cylinder head (3).
10 11 12 3 8 7 9 DA MODIFICARE RKS0 1800 30-46 SK714-5 SK815-5